For the first time, the ultra-high molecular weight polyethylene board is used, and the material of the silo is stored until the two parts of the whole storage capacity are two-thirds, and then discharged. In operation, the material should be kept at the material storage point in the warehouse, and the storage capacity of the material in the warehouse should be kept at least one-half of the capacity of the entire warehouse.
It is forbidden to directly impact the ultra-high molecular weight polyethylene board. The hardness of the various materials is different. The material and flow rate should not be changed at will. If the change is not to be greater than 12% of the original design capacity, changing the material or flow rate will affect the ultra-high molecular weight polymerization. The life of the vinyl sheet. The ambient temperature should not be greater than 80 °C. The external force should not be used to damage the structure and the loose fasteners should be loosened. The time of the material in the chamber should not exceed 36 hours, and the material with water content less than 4% can prolong the rest time.